Perkins 1300 EDi Series, Workshop Manual, Page: 119 / 264

7
Workshop Manual, TPD 1353E, Issue 3 107
Peregrine EDi and 1300 Series EDi
9 Fit the threaded rod (B1) through the bearing and the top of the tool until the handle (B2) is in the recess in
the top of the bearing. In this position adjust the threaded rod until the end is below the bottom of the cylinder
liner.
10 Fit the adaptor 21825956 (B6) onto the threaded rod and against the bottom of the cylinder liner.
11 Ensure that the two lugs on the top of the adaptor engage with the flats on the threaded rod.
12 Fit the washer and nut and tighten the nut onto the adaptor.
13 Lubricate the ratchet of the handle and the threaded rod with shell spirax or an equivalent oil. Operate the
handle to pull the cylinder liner out of the top of the cylinder block.
B
W085/1
1
2
3
4
5
6
This document has been printed from SPI². Not for Resale