Perkins 1300 EDi Series, Workshop Manual, Page: 52 / 264

3
40 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
To fit Operation 3-16
Special requirements
1 Clean the parent bore for the valve guide (A6).
2 Lubricate the outer surface of the new guide with clean engine lubricating oil.
3 Fit the adaptor 21825479 (A5) into the remover / replacer tool 21825478 (A3). Pass the tool and adapter
through the spacer (A4) and the cylinder head, from the bottom face. Fully fasten the valve guide, with the large
15° chamfer at the bottom, and the distance piece (A7), 21825935, onto the adapter with the attachment (A8).
4 Turn the top handle (A1) to take up the excess movement in the tool and turn the bottom handle (A2) to pull
the valve guide into the cylinder head.
Caution: Do not ream new valve guides. They are supplied in a finished condition.
Special tools
Description Part number Description Part number
Remover / replacer for valve guides 21825478
Adaptor 21825935
Adaptor 21825479
W133
1
2
3
4
5
6
7
8
A
This document has been printed from SPI². Not for Resale