Perkins 1300 EDi Series, Workshop Manual, Page: 182 / 264

11
170 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
7 Fit the plate for the injector unit cables (E).
8 Fit the rocker cover, see Operation 3-2.
9 Fit a new ‘O’ ring (F1) to the drain plug and fit the plug (F2) into the gallery in the supply manifold (F3).
10 Fit the valve (G1) for the fuel return pipe and tighten it to 35 Nm (26 lb ft) 3,6 kgf m.
11 Fit new copper washers to the banjo union (G3) of the fuel return pipe, fit and tighten the banjo bolt (G2)
to 35 Nm (26 lb ft) 3,6 kgf m.
12 Eliminate air from the fuel system, see Operation 11-9.
W218
E
W212
F
2
1
3
W213
G
1
2
3
This document has been printed from SPI². Not for Resale