Perkins 1300 EDi Series, Workshop Manual, Page: 101 / 264

6
Workshop Manual, TPD 1353E, Issue 3 89
Peregrine EDi and 1300 Series EDi
Timing case cover
To remove Operation 6-1
1 Drain the engine lubricating oil.
2 Drain the cooling system.
3 Remove the fan drive belt, see Operation 12-7.
4 Remove the fan, see Operation 12-5.
5 Remove the fan drive pulley and fan mounting, see Operation 12-6.
6 Remove the fan drive belt tensioner.
7 Disconnect and remove the camshaft motion sensor (CMS), see Operation 6-11.
8 Remove the alternator and its mounting bracket, see Operation 14-1.
9 Remove the pulley/damper assembly, see Operation 5-1.
10 Remove the coolant pump pulley and the coolant pump, see Operation 12-4.
11 Disconnect the electrical cable (A2) at the sensor (A1) for engine oil temperature.
12 Disconnect the electrical cable (A4) at the solenoid (A3) of the regulator valve for injection control pressure.
13 Remove the sensor (A1).
14 Use a suitable pump to drain the reservoir for the high-pressure system. Drain the reservoir through the
hole for the sensor.
15 Remove the lubricating oil pump, see Operation 10-12.
16 Release the nuts, bolts and setscrews of the timing case cover and remove the timing case cover.
17 Remove and discard the ’O’ rings (page 88/A8) and joints (page 88/A7).
W229
A
1
2
3
4
This document has been printed from SPI². Not for Resale