Perkins 1300 EDi Series, Workshop Manual, Page: 96 / 264

5
84 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
Main bearings
To remove Operation 5-14
1 Drain the lubricating oil and remove the sump, see Operation 10-9.
2 Remove all necessary components to get access to the specific bearing cap.
3 Release the setscrews of the bearing cap and remove the bearing cap (A).
4 Remove the lower shell-bearing from the cap.
5 With a suitable tool, push the upper shell-bearing from the side opposite to the location tag to remove the
bearing tag from its recess in the bearing housing.
6 Carefully rotate the crankshaft counter-clockwise (viewed from the rear of the engine) to release the bearing
from its housing.
7 Keep the halves of the shell-bearing in their relevant positions.
W139
A
This document has been printed from SPI². Not for Resale