Perkins 1300 EDi Series, Workshop Manual, Page: 168 / 264

10
156 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
Supply manifold
To remove Operation 10-24
1 Put a container of approximately 2 litres (4 pints) under the drain plug (B2) for the supply manifold.
2 Remove the banjo bolt of the fuel return pipe (A3), and disconnect the banjo union (A2). Discard the copper
washers.
3 Remove the valve (A1) for the fuel return pipe.
4 Remove the plug (B2) and drain the lubricating oil from the gallery in the supply manifold (B3). Remove and
discard the ‘O’ ring (B1).
5 Remove the container and discard the fluids safely in accordance with local regulations.
6 Disconnect the high-pressure oil pipe (C1) at the supply manifold (C3).
7 Disconnect the fuel pipe (C2) at the supply manifold. Discard the copper washers.
8 Remove the 12 setscrews that retain the supply manifold, remove the manifold. Remove and discard the
joint.
W213
A
1
2
3
W212
B
2
1
3
W211/2
C
3
2
1
This document has been printed from SPI². Not for Resale