PerkinElmer clarus 500 gc, Installation Manual

Page: 39 / 112

Clarus 500 GC Installation Guide
39
Clarus 500 GC Requirements
Laboratory Space Requirements:
Size
GC: 66 cm (26 in.) wide x 40 cm (19 in.) high x
72 cm (28.5 in.) deep
Autosampler: 13 cm (5 in.) wide x 36 cm (14 in.) high x
24 cm (9.5 in.) deep
Weight
GC: 49 kg (108 lb)
Autosampler: 4.5 kg (10 lb)
Physical Configuration: Single unit for use on standard laboratory bench
which can be interfaced to a computer.
Bench Space: The laboratory bench should be sturdy enough to
support the full weight of the GC as well as
additional equipment (i.e., computer). Expect the
total weight of the GC and accessory equipment to
be at least 91 kg (200 lb).
Allow a minimum clearance of 10.2 cm (4 in.) on
each side, 15.2 cm (6 in.) at the rear of the GC, and
137.2 cm (54 in.) at the top of the GC. If this is not
possible, install the GC on a bench that has wheels.
Peripherals, Printers, etc.
Allow at least 61 cm (24 in.) on either side of the
GC to accommodate additional equipment.