PerkinElmer clarus 500 gc, Installation Manual

Page: 30 / 112

Safety Practices
30
Hazardous Chemicals
Before using samples, you should be thoroughly familiar with all hazards and safe handling
practices. Observe the manufacturer’s recommendations for use, storage and disposal. These
recommendations are normally provided in the Material Safety Data Sheets (MSDS) supplied
with the solvents.
Be aware that the chemicals that you use in conjunction with the GC may be hazardous. DO
NOT store, handle, or work with any chemicals or hazardous materials unless you have
received appropriate safety training and have read and understood all related Material Safety
Data Sheets (MSDS). MSDSs provide information on physical characteristics, precautions,
first aid, spill clean up and disposal procedures. Familiarize yourself with the information and
precautions contained in these documents before attempting to store, use or dispose of the
reagents. Comply with all federal, state, and local laws related to chemical storage, handling,
and disposal.
You must work under a suitable hood when handling and mixing certain chemicals. The room
in which you work must have proper ventilation and a waste collection system. Always wear
appropriate safety attire (full-length laboratory coat, protective glasses, gloves, etc.), as
indicated on Material Safety Data Sheets.
WARNING
Some chemicals used with this GC may be hazardous or may
become hazardous after completion of an analysis. The responsible
body (for example, the Lab Manager) must take the necessary
precautions to ensure that the GC operators and the surrounding
workplace are not exposed to hazardous levels of toxic substances
(chemical or biological) as defined in the applicable Material Safety
Data Sheets (MSDS) or OSHA, ACGIH, or COSHH documents.
Venting for fumes and disposal of waste must be in accordance with
all national, state and local health and safety regulations and laws
.