Panasonic PT-JX200F Operating Instructions Manual Download

Page: 97 / 145

Chapter 5

Operations — Memory Viewer function

ENGLISH - 97

Playing back still images

This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail

view.

Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the file

selection.

Operation guide

Example of display during automatic playback (still image)

When automatic playback is enabled

This section describes the operations when the [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 62) is set

to [ON]. In this case, all still image files in the same folder are played back automatically according to the settings

in the [MEMORY VIEWER] menu (

page 62)

→

[INTERVAL] and [EFFECT].

1) Press

asqw

to select a file to be projected first from the thumbnails, and press the <ENTER>

button.

Playback starts in the full-screen display.

Pressing the <ENTER> button during playback pauses automatic playback. Pressing it again resumes

playback.

After playback ends, playback of the next file starts.

Pressing

during playback skips the file being played back and continues automatic playback from the

next file.

Pressing

during playback returns playback to the previous file and continues automatic playback.

Pressing

during playback rotates the image 90° clockwise with the aspect ratio maintained.

Pressing

during playback rotates the image 90° counterclockwise with the aspect ratio maintained.

2) Press the <RETURN> button.

Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.

When automatic playback is disabled

This section describes the operations when the [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 62) is set

to [OFF]. In this case, files to be projected are selected and played back one by one.

1) Press

asqw

to select a file from the thumbnails, and press the <ENTER> button.

The selected still image is played back in the full-screen display.

Pressing

plays back the next file.

Pressing

plays back the previous file.

Pressing

rotates the image 90° clockwise with the aspect ratio maintained.

Pressing

rotates the image 90° counterclockwise with the aspect ratio maintained.

2) Press the <RETURN> button.

Full-screen display ends and the Memory Viewer screen in thumbnail view returns.

Note

If the number of recording pixels is less than 1 024 x 768, the image is enlarged with the aspect ratio maintained.

If the number of recording pixels is more than 1 024 x 768, the image is reduced with the aspect ratio maintained.

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands