Chapter 3
Basic Operations — Turning on/off the projector
ENGLISH - 43
Note
f
The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu
→
[INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu
→
[DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with
the [SETUP] menu
→
[DATE AND TIME] after completing the initial setting.
1) Press
qw
on the remote control to switch the setting.
4/4
◀
▶
Please set up a time zone according to
the area of your country or region.
INITIAL SETTING
TIME ZONE
2014/01/01
+09:00
LOCAL DATE
00:00:00
LOCAL TIME
CHANGE
SET
ENTER
2) Press the <ENTER> button on the remote control.
f
Confirm the setting value and complete the initial setting.
Note
f
In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.
Making adjustments and selections
It is recommended to adjust the focus after 30 minutes have elapsed projecting.
1) 6)
5)
3)
2)
1) Press the <FOCUS> button on the remote control to roughly adjust the focus of the projection light.
(
x
page 46)
2) Set the [SETUP] menu
→
[PROJECTION METHOD] (
x
page 64) and [VERTICAL FLIP] (
x
page 64)
according to the installation condition.
f
Refer to
“Navigating through the menu” (
x
page 52) for the operation of the menu screen.
3) Press the <HDMI>, <MEMORY VIEWER>, <MIRRORING>, <Panasonic APP>, or <SIGNAGE> button on
the remote control to select the input to project. (
x
page 45)
4) Adjust the orientation of the main unit to adjust the projection position. (
x
page 35)
5) Press the <ZOOM> button on the remote control to adjust the projection size. (
x
page 46)
6) Press the <FOCUS> button on the remote control again to adjust the focus.
Note
f
The initial setting screen is displayed when the projector is turned on for the first time after purchase or when [ALL USER DATA] in the
[SETUP] menu
→
[INITIALIZE] is executed. Refer to
“When the initial setting screen is displayed” (
x
page 41).
