Chapter 3
Basic Operations — Turning on/off the projector
44 - ENGLISH
Turning off the projector
1)
2)
1)
1)
1) Press the power <
v
/
b
> button.
f
The
[POWER OFF(STANDBY)]
confirmation screen is displayed.
2) Press
qw
on the remote control to select [OK], and press the <ENTER> button.
(Or press the power <
v
/
b
> button again.)
f
The projection is finished.
3) Wait for a few seconds until the power indicator <ON (G)/STANDBY (R)> lights in red.
4) Disconnect the plug of the power cord from the outlet.
Note
f
The projector will continue to consume power when the power is supplied to the projector even if the power is turned off by
pressing the power <
v
/
b
> button.
The power consumption during standby can be conserved when the [SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE] is set
to [ECO].
f
The projector can be turned off by turning off the circuit breaker or disconnecting the plug of the power cord from the outlet during the
projection, but the settings and adjustments performed right before turning off the power may not be reflected.
f
Do not turn off the circuit breaker, disconnect the plug of the power cord from the outlet, or eject the SD card while the SD card indicator
<SD> is blinking. The projector may not operate properly or the contents of the SD card may get damaged.
f
When the [SETUP] menu
→
[ECO MANAGEMENT]
→
[STANDBY MODE] is set to [NORMAL], the internal cooling fan may operate even
during standby.
