Chapter 1
Preparation — Precautions for use
ENGLISH - 19
f
Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and
exhaust) of the projector.
Power supply unit
Power supply unit
Power supply
unit
Power
supply unit
Power
supply unit
Power supply
unit
Air exhaust
port
Air exhaust
port
Air exhaust port
Air exhaust port
Air exhaust
port
Air exhaust
port
Main unit
Main unit
Main unit
Main unit
Main unit
Main unit
Air intake port
Air exhaust port
Air exhaust
port
Air intake port
Air intake port
Air intake port
Air
intake
port
Air intake port
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
200 mm (7-7/8") or longer
200 mm (7-7/8")
or longer
*1
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
90 mm (3-
17/32")
or longer
*1
90 mm (3-17/32")
or longer
*1
90 mm
(3-17/32")
or longer
*2
*1 Distance from the wall or ceiling surface which will block the whole air intake port
*2
Distance from the wall or floor surface which will block the whole air intake port
f
Do not install the projector in a confined space.
When installing the projector in a confined space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
Cautions when transporting
f
Before transporting, tighten the ball joint fixing screw and the ball joint stopper using the supplied Allen wrench
(opposite side size 3/16"). Transporting while they are loose may cause the fingers to be caught in between or
malfunction.
