Panasonic PT-JX200F Operating Instructions Manual Download

Page: 45 / 145

Chapter 3

Basic Operations — Projecting

ENGLISH - 45

Projecting

The projection will start after confirming the connection with the external device (

page 37) and then turning

on the projector (

page 41). Select the input to project, and adjust the state of the projected image.

Selecting the input

Switch the input to project.
The input for projection can be switched directly by pressing the input selection button on the remote control.

1) Press the <HDMI>, <MEMORY VIEWER>, <MIRRORING>, <Panasonic APP>, or <SIGNAGE> button on

the remote control to select the input.

Image of the selected input is projected.

Remote control button

Input

Usage

<HDMI>

HDMI

Switches the input to HDMI.

Displays the image input to the <HDMI IN> terminal from the

external device.

Memory Viewer

Switches the input to Memory Viewer.

Displays the still image or movie recorded in the SD card using the

Memory Viewer function. (

page 94)

MIRRORING

Switches the input to MIRRORING.

Displays the image transmitted wirelessly from the Intel

WiDi /

Intel

Pro WiDi / Miracast compatible terminal.

Panasonic APPLICATION

Switches the input to Panasonic APPLICATION.

Displays the image transferred from the computer (including iPad,

iPhone, iPod touch, or Android devices) using the Panasonic image

transfer application software.

Signage

Switches the input to Signage.

Plays back and displays the contents such as still image or movie

files in the SD card according to the schedule or slideshow setting

registered with the Content Manager.

For the use of the signage playback function, please refer to the

"Operating Instructions – Content Manager Manual".

It is also possible to use the signage playback function by setting

schedule in the Content Management Software.

Note

When an audio signal is included in each input, it is output from the <AUDIO OUT> terminal.

To switch the input to anything other than the HDMI input, it may take seconds to complete the switching. [Please wait...] is displayed on the

projection screen when the switching takes time.

When the <HDMI>, <MEMORY VIEWER>, <MIRRORING>, or <Panasonic APP> button is pressed during signage playback, the signage

playback is stopped and switches to respective input.

Pressing the <SIGNAGE> button while the signage playback is in standby or stopped will switch the input to signage, and the signage

playback will start or resume.

Refer to “Operating Instructions – Content Manager Manual” for the signage playback.

The image transfer application software “Wireless Manager ME6.3” compatible with Windows computers or Mac is contained in the supplied

CD-ROM. For the image transfer application software compatible with iPad/iPhone/iPod touch, and Android devices, refer to the following

URL

http://panasonic.net/avc/projector/

The “Content Management Software” compatible with Windows computers can set schedule used for signage playback. For details, refer to

the following URL

http://panasonic.net/avc/projector/

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands