Panasonic PT-JX200F Operating Instructions Manual Download Page 71

Page: 71 / 145

Chapter 4

Settings — [SETUP] menu

ENGLISH - 71

2) Press the <ENTER> button.

The

[AUDIO SETTING]

screen is displayed.

3) Press

to select [BALANCE].

4) Press

to adjust the level.

Operation

Adjustment

Range of adjustment

Press

Increases the volume on the right.

L16 - R16

Press

Increases the volume on the left.

Note

The projector has no built-in speakers. Audio is output from the external audio device connected to the <AUDIO OUT> terminal.

[DC OUT]

This function can be used to supply power by the <DC OUT> terminal.

1) Press

to select [DC OUT].

2) Press

to switch the item.

The items will switch each time you press the button.

[ON]

Power is supplied to an external device connected to the <DC OUT> terminal.

[OFF]

Power is not supplied to an external device connected to the <DC OUT> terminal.

Note

An [ERROR] message is displayed and power supply is ceased when the power supplied by the connected device exceeds the rated power

(DC 5 V, maximum 2 A). When [ERROR] appears, please switch off and on the power of the projector.

Power supply is ceased in standby mode even when [DC OUT] is set to [ON].

[STATUS]

Display the status of the projector.

1) Press

to select [STATUS].

2) Press the <ENTER> button.

The

[STATUS]

screen is displayed.

3) Press

to switch the pages.

The page will change each time you press the button.

[INPUT]

Displays the currently selected input.

[SIGNAGE]

Displays the status of signage playback.

[SIGNAL NAME]

Displays the input signal name.

[SIGNAL FREQUENCY]

Displays the frequency of the input signal.

[PROJECTOR RUNTIME]

Displays the runtime of the projector.

[LIGHT RUNTIME]

Displays the runtime of the light source.

[INTAKE AIR TEMP.]

Displays the status of the air intake temperature of the projector.

[OPTICS MODULE TEMP.]

Displays the status of the internal temperature of the projector.

[DC OUT]

Displays the power supply status from the <DC OUT> terminal.

[PROJECTOR TYPE]

Displays the type of the projector.

[SERIAL NUMBER]

Displays the serial number of the projector.

[MAIN VERSION]

Displays the main version of the firmware of the projector.

[SUB VERSION]

Displays the sub version of the firmware of the projector.

[NETWORK VERSION]

Displays the network version of the projector.

Note

The content of status can be sent via E-mail to E-mail addresses (up to two) set in

“[E-mail set up] page” (

page 116) by pressing the

<ENTER> button while the [STATUS] screen is displayed.

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands