Panasonic PT-JX200F Operating Instructions Manual Download Page 98

Page: 98 / 145

Chapter 5

Operations — Memory Viewer function

98 - ENGLISH

The playback order follows the display order set in the [MEMORY VIEWER] menu

→

[SORT] (

page 62).

Also in the cases where still image and movie files both exist in the same folder, they are played back according to the [SORT] setting.

The operation guide on the lower part of the playback screen can be hidden by setting the [MEMORY VIEWER] menu

→

[GUIDE]

(

page 63) to [OFF].

When images cannot be played, an error message is displayed.

When switching the input to [MEMOERY VIEWER] while [AUTOPLAY] is set to [ON], automatic playback starts.

Playing back movies

This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail

view.

Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the file

selection.

Example of display during fast-forward playback (x10 speed)

Status display

Time bar

Operation guide

When automatic playback is enabled

This section describes the operations when the [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 62) is set

to [ON].

In this case, all movie files in the same folder are played back automatically.

1) Press

asqw

to select a file to be projected first from the thumbnails, and press the <ENTER>

button.

Playback starts in the full-screen display.

Pressing the <ENTER> button during playback pauses playback. Pressing it again resumes playback from

the position where the playback has been stopped.

After playback ends, playback of the next file starts.

Pressing

during playback performs fast-forward playback. Every press of

increases the speed. (3

levels)

Pressing

during playback performs rewind playback. Every press of

increases the speed. (3 levels)

Pressing

plays back the file being played back from the beginning. (cue)

Pressing

during pause skips the file being played back and starts playback of the next file.

Pressing

during pause returns playback to the previous file and starts playback.

2) Press the <RETURN> button.

Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.

When automatic playback is disabled

This section describes the operations when the [MEMORY VIEWER] menu

→

[AUTOPLAY] (

page 62) is set

to [OFF].

In this case, files to be projected are selected and played back one by one.

1) Press

asqw

to select a file from the thumbnails, and press the <ENTER> button.

Playback starts in the full-screen display.

Pressing the <ENTER> button during playback pauses playback. Pressing it again resumes playback from

the position where the playback has been stopped.

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands