Panasonic PT-JX200F Operating Instructions Manual Download

Page: 109 / 145

Chapter 5

Operations — Web control function

ENGLISH - 109

Error information page

When [Error (Detail)] or [WARNING (Detail)] appears in the self-diagnosis display of the

[Projector status]

screen, click it to display the error/warning details.

The projector may go into the standby status to protect the projector depending on the contents of the error.

Error( Detail )

1 Self-diagnosis result display

Displays the item check results.

[OK]:

Indicates that operation is normal.

[FAILED]:

Indicates that there is a problem.

[WARNING]:

Indicates that there is a warning.

[FAILED] items

Item

Description

[MAIN CPU BUS]

There is a problem with the microcomputer circuitry. Consult your dealer.

[FAN]

There is a problem with the internal cooling fan or the fan drive circuit. Consult your

dealer.

[INTAKE AIR TEMPERATURE]

The intake air temperature is high. The projector may be used in an environment where

the temperature is high, such as near a heating appliance.

[OPTICS MODULE TEMPERATURE]

The temperature around the optics module inside the projector is high. The projector

may be used in an environment where the temperature is high, such as near a heating

appliance.

[LD MODULE TEMPERATURE]

The temperature of the light source is high. The projector is possibly used in an

environment where the temperature is high, such as near a heating appliance.

[LOW-TEMPERATURE]

The internal temperature of the projector or ambient temperature is low. Projection

cannot be started until the internal temperature of the projector or ambient temperature

becomes warm.

[LD STATUS]

The light source failed to turn on or off. Wait for a while until the light source cools off,

and then turn on the power.

[INTAKE AIR TEMP.SENSOR]

There is a problem with the intake temperature detection sensor. Consult your dealer.

[OPTICS MODULE TEMP.SENSOR]

There is a problem with the temperature detection sensor around the optics module

inside the projector. Consult your dealer.

[LD MODULE TEMP.SENSOR]

There is a problem with the temperature sensor of the light source. Consult your dealer.

[PHOSPHOR WHEEL]

There is a problem with the phosphor wheel or phosphor wheel drive circuit. Consult

your dealer.

[COLOR WHEEL]

There is a problem with the color wheel or color wheel drive circuit. Consult your dealer.

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands