Panasonic PT-JX200F Operating Instructions Manual Download Page 87

Page: 87 / 145

Chapter 4

Settings — [NETWORK] menu

ENGLISH - 87

4) Press

to select each item, and press

to change the settings.

[CONNECTION TYPE]

Selects the connection type for the MIRRORING function.

[PIN]

A PIN (8-digit number) will be displayed in the idle screen of the

MIRRORING function, and then makes connection by entering the

PIN on the device.

[AUTO]

If PIN connection is supported on the device, perform PIN

connection. If it is not supported, perform connection without a PIN.

[CHANNEL]

Selects the communication channels used by Intel

WiDi / Intel

Pro WiDi / Miracast.

[LOWER BANDWIDTH MODE]

Enables / disables the lower bandwidth mode of Intel

WiDi or Intel

Pro WiDi.

[OFF]

Disables the lower bandwidth mode.

[ON]

Enables the lower bandwidth mode. The bit rate will decrease, and

the image quality will reduce.

[MOBILE CONNECTION]

Use mobile devices as necessary when the connection is poor. Usually it is not necessary to use

mobile connection.

[OFF]

Disables mobile connection.

[ON]

Enables mobile connection.

5) Press

to select [STORE], and press the <ENTER> button.

6) When the confirmation screen is displayed, press

to select [OK], and press the <ENTER> button.

Note

For more information about Intel

WiDi or Intel

Pro WiDi conference mode, please refer to the HELP of Intel

WiDi or Intel

Pro WiDi

application, or visit the Intel Corporation website.

When switching from [SINGLE] to other items or from other items to [SINGLE] in the [MIRRORING] setting screen, the device may not be

connected. In this case, please eliminate the connection history with the projector at the device.

Summary of Contents for PT-JX200F


















































































































































Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands

Panasonic PT-JX200F, Operating Instructions Manual

Search results

Summary of Contents for PT-JX200F

Reviews:

Related manuals for PT-JX200F

Brands by name

Popular brands