Panasonic KX-NS500, Features Manual

Page: 491 / 580

Button Usage
Single-CO (S-CO) Used to access a specified trunk for making or receiving calls.
DN A type of button specific to SIP phones. For details, refer to the
telephone’s documentation.
One-Touch Used to dial a specified number or feature. For details, refer to the
telephone’s documentation.
Login/Logout
Used to switch between log-in and log-out mode. (
®
2.2.2.8 Log-in/
Log-out)
Contact (DSS) Access another extension with one touch. Unlike a One-Touch button, this
type of button cannot be used to dial feature numbers.
Wrap-up Used to switch between the Wrap-up/Not Ready and Ready modes.
(
®
2.2.2.8 Log-in/Log-out)
Call Park
Place the current call into a parking zone of the PBX. (
®
2.13.2 Call
Park) There are two modes:
•
Specific: Place the call into the specified park zone.
•
Automatic: The telephone searches for an idle park zone from among
those assigned to its own flexible buttons.
Conditions
•
S-PSs can operate only under a SIP-CS. They are not compatible with other types of CSs (e.g., IP-CSs).
Also, other types of PSs cannot operate under a SIP-CS.
•
SIP-CSs can operate under the same PBX as other types of CSs (e.g., IP-CS) so long as each type’s
wireless range does not overlap with the other.
•
To allow roaming to a remote location, a SIP-CS must be installed at the remote location, and the
SIP-CS’s SIP server must be the same PBX to which the S-PS is registered.
For example, in the following figure if the S-PS is registered to the PBX, it can roam between SIP-CS (A)
and SIP-CS (B) because they both use the PBX as their SIP server.
VPN
Router Router
PBX
IP Network
: SIP server connection
: LAN
Roaming
SIP-CS (A) SIP-CS (B)
•
DSP Resource Usage
Feature Guide 491
5.2.2 SIP (Session Initiation Protocol) Extension