Panasonic AW-UE100 Operating Instructions Manual Download Page 161

Page: 161 / 180

Button for displaying the operation menu for the live

screen

Use this to display the operation menu for the live screen.

< Live

Use this to close the operation menu for the live screen.

Power

Switch Power On/Standby.

For details, refer to the [Power On] button and [Standby] button.

Compression

As only JPEG images can be displayed on mobile terminals, only the

[JPEG] button is displayed.

Streaming

Switch between JPEG(1)/JPEG(2)/JPEG(3).

For details, refer to [Stream].

Zoom

Enable or disable [D-Zoom], [D-Ext. ×1.4], and [D-Ext. ×2.0].

For details, refer to [Zoom].

Stream (SRT/RTMP)

Starts streaming transmission to the RTMP/RTMPS server or the SRT

compatible decoder that was pre-registered.

Lock(WEB)

Enable or disable [Lock(WEB)].

For details, refer to Operation lock button [Lock].

Color Bar

Switch the color bar signal displayed or hide.

Bar Type

Switch the color bar displayed between Type1 and Type2.

Button for switching P/T Speed/Zoom

Use this to switch the buttons in the operation area.

When this is pressed while [P/T Speed] is being displayed, this

displays the speed [Speed] button/slider in the operation area.

When this is pressed while [Zoom] is being displayed, this displays

the zoom [Zoom] button/slider in the operation area.

P/T Speed/Zoom operation area

The [P/T Speed]/[Zoom] button/slider is displayed.

Switch between [P/T Speed] and [Zoom] with the button for switching

P/T Speed/Zoom.

• The functionality of the operation buttons is the same as the buttons

displayed in the usual live screen.

×1.0 button

Use this to adjust the zoom (magnification) to 1.0x.

Home button

Move to the preset home position.

Preset thumbnail operation area

When a preset thumbnail is clicked, the camera moves to face

towards a preset position that was registered beforehand.

By swiping left in the preset thumbnail operation area, preset

thumbnails that are not displayed can be displayed.

• You can select Preset1 to Preset100.

Button for switching the personal computer screen

This is used for switching to the live screen display for a personal

computer.

Press the mobile screen display button on the live screen for personal

computers to return to the mobile live screen.

Mobile screen display button:

Button for switching PTZ/Focus

Use this to switch the buttons in the operation area.

When this is pressed while [PTZ] is being displayed, this displays the

control pad buttons in the operation area.

When this is pressed while [Focus Manual] or [Focus Auto] is being

displayed, this displays the [Focus] button/slider in the operation area.

PTZ/Focus operation area

The [PTZ]/[Focus] button/slider is displayed.

Switch between [PTZ] and [Focus] with the button for switching PTZ/

Focus.

• The functionality of the operation buttons is the same as the buttons

displayed in the usual live screen.

10.

Focus (AUTO)/Iris (AUTO) button

When [PTZ] is selected with the button for switching [PTZ]/[Focus],

the button for enabling or disabling Iris (Auto) is displayed.

When [Focus] is selected, the button for enabling or disabling Focus

(Auto) is displayed.

Control Area

In the Control Area, operations by operation buttons are prioritized.

Scrolling of the screen as a whole can be done with touch operations

outside the Control Area.

<NOTE>

• Depending on the mobile terminal you are using, it may be necessary

to scroll the screen as a whole to adjust the position of the Control

Area.

160

161

Displaying the web screen using a mobile terminal (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands