Panasonic AW-UE100 Operating Instructions Manual Download Page 132

Page: 132 / 180

Preset position screen [Preset position]

Preset

The setting is confirmed with the [SET] button.

When a preset thumbnail is clicked, the camera

moves to face towards a preset position that was

registered beforehand.

You can select Home and Preset001 to Preset100.

Preset numbers are displayed in green when they

have had a preset position registered in them.

(Preset name)

Preset names are displayed.

During the preset registration mode, you can select

a preset name and change the display name.

You can enter between 1 to 15 characters.

The characters available are 0 to 9, A to Z, a to z,

spaces, and underscores ( _ ).

[1] - [12]

Switches the page of the displayed preset

thumbnails.

[Home]

Move to home position.

[SET]

The unit moves to the preset registration mode.

When a preset thumbnail is clicked in the preset

registration mode, it is registered in the preset

position specified by the current condition.

[DEL]

The unit moves to the preset delete mode.

When a preset thumbnail is clicked in the preset

delete mode, the specified preset position settings

are deleted.

[Save]

Acquire JPEG images (still images) and save them.

PICT001 to PICT100 can be specified in the save

destination so that you can update the thumbnail

image for the corresponding preset number.

132

Web screen configurations (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands