Panasonic AW-UE100 Operating Instructions Manual Download Page 85

Page: 85 / 180

Monitor

Displays the status of the device or monitor connected to the HDMI

connector.

One of the following is displayed according to the product

specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

Available

This indicates that [Connect] is HDMI and the

device or monitor connected supports the format

output by this unit.

Unsupport UHD

This indicates that [Connect] is HDMI and the

device or monitor connected does not support the

format output by this unit.

Unsupport UHD

60p/50p
Unsupport UHD

60p 4:2:2
Unsupport UHD

50p 4:2:2
Unsupport UHD

60p 4:2:0
Unsupport UHD

50p 4:2:0
Unsupport Format This indicates that [Connect] is HDMI and the

device or monitor connected is not supported for a

reason other than those shown above.

Return

Return to the previous menu level.

Error Status screen

Error Status

Lens No Error

Pan/Tilt No Error

Fan No Error

Temperature No Error

Return

Lens [No Error, Error]

This displays the error status of the lens.

No Error

The lens is operating normally.

Error

A lens error has occurred.

Pan/Tilt [No Error, Error]

This displays the error status of the pan-tilt drive section.

No Error

The pan-tilt drive section is operating normally.

Error

A pan-tilt drive section error has occurred.

Fan [No Error, Error]

This displays the error status of the fan.

No Error

The fan is operating normally.

Error

A fan error has occurred.

Temperature [No Error, High Temperature, Sensor Error]

This displays the status of temperature related errors.

No Error

Within normal operating temperature range.

High

Temperature

Temperature is high.

Sensor Error

The temperature sensor may have malfunctioned.

<NOTE>

• When the above errors occur, notification of the errors are sent via

IP/serial to the external device (AW-RP150 or AW-RP60, etc.), so

these errors can be displayed on the external device.

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands