Panasonic AW-UE100 Operating Instructions Manual Download Page 116

Page: 116 / 180

Frame rate [24fps, 25fps, 30fps, 50fps, 60fps]

Set the frame rate for H.265 images.

59.94Hz

30fps, 60fps

50Hz

25fps, 50fps

24/23.98Hz

24fps

Factory settings:

For 59.94Hz: 30fps

For 50Hz: 25fps

For 24/23.98Hz: 24fps

<NOTE>

• [60fps(50fps)] cannot be selected when the video format is

[29.97p(25p)].

Max bit rate(per client)

[512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps,

3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps,

12288kbps, 12800kbps, 14336kbps, 16384kbps, 20480kbps,

24576kbps, 25600kbps, 51200kbps, 76800kbps]

Specify the H.265 bit rate per client.

Factory settings:

H.265(1): 14336kbps

H.265(2): 8192kbps

Transmission type

The same as H.264 Transmission type (→ page 114).

Unicast port(Image)

The same as H.264 Unicast port(Image) (→ page 115).

Unicast port(Audio)

The same as H.264 Unicast port(Audio) (→ page 115).

Multicast address

The same as H.264 Multicast address (→ page 115).

Multicast port

The same as H.264 Multicast port (→ page 115).

Multicast TTL/HOPLimit

The same as H.264 Multicast TTL/HOPLimit (→ page 115).

RTMP

Make RTMP/RTMPS transmission settings.

Server setup

The setting is confirmed with the [Set] button.

<NOTE>

• Switch to the appropriate method of registering RTMP/RTMPS

transmission server information suited to the setting information

notified from the RTMP/RTMPS transmission server you are using.

• The Stream Key setting field is displayed only when [Type2] is set.

• When performing RTMP transmissions, set the Server URL and

Stream key acquired from the external application, and then click

the [start] button for [Live Streaming] in the live screen [Live].

• When performing RTMP transmissions, enable connection with the

network in the [Network] screen.

URL type [Type1, Type2]

Select the method for registering the information for the RTMP/

RTMPS transmission server.

Type1

Specify to set the server URL and RTMP/RTMPS stream

key as a set in [Server URL].

Type2

Specify to individually set the server URL and RTMP/

RTMPS stream key in [Server URL] and [Stream Key].

URL

Server URL

Set the URL for the RTMP/RTMPS server to be transmitted to.

Stream key

The stream key obtained from the RTMP/RTMPS server is set

during streaming only when the service is set to [Type2].

116

Web screen configurations (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands