z
When [Preset Speed Unit] is [Time]
It is possible to specify the times (time taken to move, time taken to accelerate, time taken to decelerate) and the S-curve steps for operation.
<NOTE>
• When the acceleration operation cannot be performed within the specified time even at maximum acceleration speed of the device, the operation will
not be performed by the specified time.
• As the time specified in [Preset Speed] takes precedence as the total time for preset playback, if the times specified in [Rise Ramp Time] and [Fall
Ramp Time] are more than half of the time specified in [Preset Speed], this will not operate as specified.
Range during which the speed reaches the maximum
according to that specified by preset operation of pan/tilt
Acceleration
range
Deceleration
range
[Rise Ramp Time]
0.1s to 10.0s
The shorter the time, the less time it
takes to reach the maximum speed
[Fall Ramp Time]
0.1s to 10.0s
The shorter the time, the less time it
takes to stop
The time taken to move to the destination from
when the preset is started
(Time specified with [Preset Speed])
[Rise S‑Curve]
0 to 30
[Fall S‑Curve]
0 to 30
The larger that the value of the S-curve is, the greater
the speed changes when accelerating or decelerating
(represented by the dotted line rather than the solid line), and
the operational feel of acceleration and deceleration changes.
There is no change in the time taken for accelerating or
decelerating with the S-curve setting.
Operation speed
80
Camera menu items (continued)
