Panasonic AW-UE100 Operating Instructions Manual Download Page 164

Page: 164 / 180

Safe mode

Concerning the safe mode

The unit goes into the safe mode when the pan-tilt head is forcibly

moved by an external force or when something impedes its rotation.

Once the safe mode has been established, some or all of the operations

will no longer be acknowledged to ensure safety and prevent equipment

damage.

Detection of equipment trouble

When the unit has detected trouble, its functions are shut down, then

the unit is restarted or the initial setting operation is performed, and the

normal condition of the unit is restored after about 30 seconds.

<NOTE>

• When trouble is detected, pictures may no longer be output for a while,

but they will be restored in 5 seconds to 10 seconds.

164

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands