Panasonic AW-UE100 Operating Instructions Manual Download Page 2

Page: 2 / 180

Read this first! (For AW‑UE100WP, AW‑UE100KP)

WARNING:

• To reduce the risk of fire or electric shock, do not expose this

equipment to rain or moisture.

• To reduce the risk of fire or electric shock, keep this equipment

away from all liquids. Use and store only in locations which are

not exposed to the risk of dripping or splashing liquids, and do

not place any liquid containers on top of the equipment.

WARNING:

Always keep the main unit mounting screw, bracket mounting

screws and drop-prevention wire mounting screw out of the

reach of infants and small children.

WARNING:

Installation should only be performed by qualified installation

personnel.

Improper installation may result in the entire apparatus falling

down and causing injury.

CAUTION:

Do not remove panel covers by unscrewing.

To reduce the risk of electric shock, do not remove the covers.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION:

This apparatus can be operated at a voltage in the range of 100

– 240 V AC.

Voltages other than 120 V are not intended for U.S.A. and

Canada.

Operation at a voltage other than 120 V AC may require the use

of a different AC plug. Please contact either a local or foreign

Panasonic authorized service center for assistance in selecting

an alternate AC plug.

CAUTION:

The mains plug of the power supply cord shall remain readily

operable.

The AC receptacle (mains socket outlet) shall be installed near

the equipment and shall be easily accessible. To completely

disconnect this equipment from the AC mains, disconnect the

power cord plug from the AC receptacle.

CAUTION:

In order to maintain adequate ventilation, do not install or place

this unit in a bookcase, built-in cabinet or any other confined

space. To prevent risk of electric shock or fire hazard due to

overheating, ensure that curtains and any other materials do not

obstruct the ventilation.

CAUTION:

To reduce the risk of fire or electric shock and annoying

interference, use the recommended accessories only.

CAUTION:

Check the installation at least once a year.

An improper installation could cause the unit to fall off resulting

in personal injury.

indicates safety information.

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands