10.
Pan‑tilt buttons and menu operation buttons
<
4
> <
5
> <
b
> <
a
> <
M
>
1) These are used to change the unit’s direction.
The unit is tilted in the up/down direction using the <
4
> and <
5
>
buttons and panned in the left/right direction using the <
b
> and
<
a
> buttons.
The <
M
> button does not work during tilting and panning.
When the <
4
> or <
5
> and <
b
> or <
a
> buttons are pressed at the
same time, the unit moves diagonally.
2) The buttons are used for menu operations when the unit displays
the camera menus.
Use the <
4
> , <
5
> (<
b
>, <
a
>) buttons to select the menu items.
When a selected item has a sub-menu, the sub-menu will be
displayed by pressing the <
M
> button.
When the cursor is aligned with a particular item and the <
M
>
button is pressed on the setting menu at the bottom hierarchical
level, the setting of the selected item blinks.
When the <
M
> button is pressed after the setting has been
changed using the <
4
> and <
5
> (<
b
> and <
a
>) buttons, the
setting stops blinking, and the new setting is entered.
A setting for a regular menu item is reflected immediately if it is
changed while it is still flashing.
If the <MENU> button is pressed quickly (for less than 2 seconds)
while the setting is in the blinking status, the change will be
canceled, and the setting selected prior to the change will be
restored.
<NOTE>
• To prevent malfunctioning, there are a number of menu items
([Scene], [Format] and [Frequency]) whose setting is not reflected
immediately even if it is changed while it is still flashing.
It is reflected only after the <
M
> button has been pressed, causing
the setting to stop flashing and the new setting to be entered.
• A confirmation screen appears before the settings of some menu
items are to be entered.
11.
FOCUS button <F> <N>
These are used to adjust the lens focus manually when the manual
setting is established for the lens focus.
The focus is adjusted in the far using the <F> button and in the near
using the <N> button.
12.
A/FOCUS button <A/FOCUS>
This is used when automatically adjusting the lens focus.
13.
M/FOCUS button <M/FOCUS>
This is used when manually adjusting the lens focus.
The FOCUS buttons (<F> and <N>) are used when performing the
actual adjustment.
14.
OPT button <ON> <OFF>
Turn night mode on/off.
<NOTE>
• In night mode, video output will be in black and white. In addition,
the iris will be forcibly opened.
• White balance adjustment is not possible in night mode.
• ND filter switching is not possible in night mode.
15.
HOME button <HOME>
When this is pressed for 2 seconds, the unit’s direction (panning or
tilting) returns to the reference position.
16.
ZOOM button <T> <W>
These are used to adjust the lens zoom.
The zoom is adjusted in the wide-angle using the <W> button and in
the telephoto using the <T> button.
17.
FAST button <FAST>
This is used to change the movement speed at which the panning,
tilting, zooming and focusing operations are performed to the high
speed.
When the button is tapped, the movement speed can be set to the
normal high-speed operation. When the button is held down, it can be
set to an even faster high-speed operation. Tap the button to return
the movement speed to the normal high-speed operation.
<NOTE>
• The operating speed for panning and tilting when the preset
memory settings have been called can be changed using the
“Preset Speed” item of the camera menu.
18.
SLOW button <SLOW>
This is used to change the movement speed at which the panning,
tilting, zooming and focusing operations are performed to the low
speed.
When the button is tapped, the movement speed can be set to the
normal low-speed operation. When the button is held down, it can be
set to an even slower low-speed operation. Tap the button to return
the movement speed to the normal low-speed operation.
19.
A/IRIS button <A/IRIS>
This establishes the setting for adjusting the lens iris automatically in
line with the light quantity.
20.
M/IRIS button <M/IRIS>
This establishes the setting for adjusting the lens iris manually.
The <IRIS +> and <IRIS –> buttons are used when performing the
actual adjustment.
21.
IRIS + button <IRIS +>
This is used to adjust the lens iris in the opening direction.
22.
IRIS – button <IRIS –>
This is used to adjust the lens iris in the closing direction.
28
29
Parts and their functions (continued)
