Basic shooting operations
1.
Set the subject brightness to the appropriate level.
2.
Turn on the power of all the units and devices in the
system.
3.
Select the unit to be operated.
Even when using only one unit, it must still be selected from the
wireless remote control or controller.
4.
Select the shooting mode.
One of four shooting modes (Scene1, Scene2, Scene3 or Scene4)
— whichever one will best suit the shooting conditions — can be
selected.
The shooting modes are set by the user.
For details of the factory settings, refer to pages 86 to 92.
Select the mode that satisfies the shooting conditions and suits your
preferences.
When continuing to shoot in the same circumstances, there is no
need to select another mode.
5.
Start shooting.
(After shooting, turn off the power of all the units and
devices in the system.)
<NOTE>
• Some of the initial settings are auto settings and cannot be operated
manually. To operate them manually, switch from the auto settings to
the manual settings as required.
If the settings have already been changed and the original settings are
to be restored, refer to the “What to do when encountering problems
in the basic shooting operations” (→ page 39) and “Camera screen”
(→ page 50) in “Camera menu items”.
34
