Panasonic AW-UE100 Operating Instructions Manual Download Page 117

Page: 117 / 180

Streaming format

Make settings for H.264 images for use in RTMP/RTMPS

transmission.

The setting is confirmed with the [Set] button.

Refer to the explanation for H.264 (→ page 113) for information

about Image capture size, Frame rate and Max bit rate(per client).

<NOTE>

• Streaming format settings cannot be changed during RTMP/RTMPS

transmissions.

• Set the Streaming format to the settings recommended for the

transmission destination server. Visit the publisher’s website or

contact them about the recommended values.

• When [IP(UDP)] of [Tracking Data Output] is set to [On], video

transmission via IP may be delayed or the video may suffer frame

loss. (→ page 136)

We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off]

during RTMP/RTMPS transmission.

SRT

Make SRT transmission settings.

<NOTE>

• When starting SRT transmissions in the [Listener] mode, set the

decoder and application to [Client] mode and set the following URL:

srt://[unit’s IP address]:[value set in Client port]

• When performing SRT transmissions in the [Client] mode, set the

IP address and port number of the decoder and application to

[Destination IP address] and [Destination port], and then click the

[start] button for [Live Streaming] in the live screen [Live].

Common setup

The setting is confirmed with the [Set] button.

Mode [Client, Listener]

Selects the method to connect to the SRT compatible decoder or

service.

Client

Specify the transmission destination IP address and port

number when starting transmission from this unit.

Listener

Specify the listener port when awaiting the external request

to start transmission.

Factory settings:

Listener

Destination IP address

When [Client] is set in [Mode], enter the IP address.

Images and audio will be sent to the specified IP address.

<NOTE>

• Only IPv4 can be set as the IP address.

Destination port

When [Client] is set in [Mode], enter the port number (used when

transmitting images from this unit).

Connection is to the specified port number.

Client port

When [Listener] is set in [Mode], enter the port number (used when

this unit is waiting for a connection).

The following port numbers are used by the unit so they cannot be

used.

20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 546,

547, 554, 995, 5960 to 5985, 7960 to 8060, 10669, 10670, 11900,

59000 to 61000

116

117

Web screen configurations (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands