Panasonic AW-UE100 Operating Instructions Manual Download Page 60

Page: 60 / 180

System 1/2 screen

System 1/2

Frequency 59.94Hz

Format 2160/59.94p

UHD Crop Off

Crop Zoom Off

Shooting Mode Normal

Genlock

Horizontal Phase 0

Return

Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]

This item is selected to switch the frame frequency.

• For details on how to change the frequency, refer to “Changing the

frequency” (→ page 63).

Format

For [59.94Hz]

2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,

1080/29.97PsF, 1080/23.98p(59.94i)

, 720/59.94p

For [50Hz]

2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,

720/50p

For [24Hz]

2160/24p, 1080/24p

For [23.98Hz]

2160/23.98p, 1080/23.98p, 1080/23.98PsF

It denotes “1080/23.98p over 59.94i”.

<NOTE>

• Streaming stops when changing the system format.

• For details on how to change the format, refer to “Changing the

format” (→ page 63).

UHD Crop [Off, Crop(1080), Crop(720)]

Sets the Crop function which crops UHD(3840×2160) images.

Off

Disable the Crop function.

Crop(1080)

Crops the designated area from UHD(3840×2160)

images and outputs 1920×1080 images.

The images are cropped to the following sizes.

• When [Crop Zoom] is [Off]

Crops with 1920×1080 angle of view to output

1920×1080 size.

• When [Crop Zoom] is [On]

Crops area according to the value specified in [Crop

Zoom Ratio] on [UHD Crop 2/2] screen and outputs the

cropped image in 1920×1080 size.

(→ page 72)

This is enabled when [Format] is the following.

2160/59.94p, 2160/29.97p

2160/50p, 2160/25p

2160/24p, 2160/23.98p

Crop(720)

Crops the designated area from UHD(3840×2160)

images and outputs 1280×720 images.

The images are cropped to the following sizes.

• When [Crop Zoom] is [Off]

Crops with 1280×720 angle of view to output 1280×720

size.

• When [Crop Zoom] is [On]

Crops area according to the value specified in [Crop

Zoom Ratio] on [UHD Crop 2/2] screen and outputs the

cropped image in 1280×720 size.

(→ page 72)

This is enabled when [Format] is the following.

2160/59.94p, 2160/50p

<NOTE>

• When [UHD Crop] is changed, IP video transmission is temporarily

stopped.

• When [UHD Crop] is changed from [Off] to [Crop(1080)], the

[Format] of [Output] for each of the 12G SDI OUT, 3G SDI OUT and

HDMI connectors changes to FHD (1920×1080).

• When [UHD Crop] is changed from [Off] to [Crop(720)], the [Format]

of [Output] for each of the 12G SDI OUT, 3G SDI OUT and HDMI

connectors changes to FHD (1280×720).

• When [UHD Crop] changes from [Crop(1080)] or [Crop(720)] to

[Off], the [Format] of [Output] for each of the 12G SDI OUT and

HDMI connectors does not change back to UHD (3840×2160).

• When [UHD Crop] is [Crop(1080)] or [Crop(720)], the following

values cannot be set in [Streaming mode].

H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD), SRT(H.264

UHD), SRT(H.265 UHD)

(→ page 139)

• When H.264(UHD), U.265(UHD), JPEG(UHD), RTMP(UHD),

SRT(H.264 UHD) or SRT(H.265 UHD) is selected in [Streaming

mode] and [UHD Crop] is switched to [Crop(1080)] or [Crop(720)],

the [Streaming mode] setting changes to [H.264].

• When [UHD Crop] is [Crop(1080)] or [Crop(720)], [Zoom Mode] is

disabled and functions as [Opt.Zoom].

Camera menu items (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands