Panasonic AW-UE100 Operating Instructions Manual Download Page 54

Page: 54 / 180

Picture 2/6 screen

Picture 2/6

Chroma Level 0%

Chroma Phase 0

Master Pedestal 0

R Pedestal 0

G Pedestal 0

B Pedestal 0

Pedestal Offset Off

Return

Chroma Level [Off, –99% to 99%]

Set here the color intensity (chroma level) of the images.

Chroma Phase [–31 to +31]

Make fine adjustments to the hue of the colors in the images.

Master Pedestal [–200 to +200]

This item is used to adjust the black level (adjust the pedestal).

These parts become darker when a negative setting is selected and,

conversely, lighter when a positive setting is selected.

R Pedestal [–100 to +100]

This enables the R pedestal to be adjusted.

G Pedestal [–100 to +100]

This enables the G pedestal to be adjusted.

B Pedestal [–100 to +100]

This enables the B pedestal to be adjusted.

Pedestal Offset [Off, On]

Set the pedestal level of the Rch, Gch, and Bch when the auto black

balance has been adjusted.

Off

Set the pedestal level to [0] for [R Pedestal], [G Pedestal],

and [B Pedestal].

Maintain the values set for each of [R Pedestal],

[G Pedestal], and [B Pedestal].

Return

Return to the previous menu level.

Picture 3/6 screen

Picture 3/6

Detail On

Master Detail 0

Detail Coring 15

V Detail Level 0

Detail Frequency 0

Level Depend. 0

Knee Aperture Level 2

Detail Gain(+) 0

Detail Gain(—) 0

Return

Detail [Off, On]

Turn on/off the contour (sharpness of images) adjustment of images.

Master Detail [–31 to +31]

Adjust the contour correction level (master).

This is only enabled when [Detail] is set to [On].

Detail Coring [0 to 60]

Set the level of the signal (including noise) which makes the detail

effect not work.

This is only enabled when [Detail] is set to [On].

V Detail Level [–7 to +7]

Adjust the contour correction level in the vertical direction.

This is only enabled when [Detail] is set to [On].

Detail Frequency [–7 to +7]

Set the boost frequency of detail.

–7

: Low frequency

: High frequency

When a high frequency is selected, the detail effect is added to

subjects with more definition.

This is only enabled when [Detail] is set to [On].

Level Depend. [–7 to +7]

When the detail of bright signals are emphasized, the detail of dark

parts are compressed.

The larger the [Level Depend.] setting, the more detail of bright parts

is compressed.

This is only enabled when [Detail] is set to [On].

Knee Aperture Level [0 to 5]

Set the detail level of very bright parts.

This is only enabled when [Detail] is set to [On].

Detail Gain(+) [–31 to +31]

Set the detail level of the plus direction (direction to be made

brighter).

This is only enabled when [Detail] is set to [On].

Detail Gain(–) [–31 to +31]

Set the detail level of the minus direction (direction to be made

darker).

This is only enabled when [Detail] is set to [On].

Return

Return to the previous menu level.

Camera menu items (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands