Panasonic AW-UE100 Operating Instructions Manual Download Page 107

Page: 107 / 180

HDMI

Make the settings for output from the HDMI connector.

Format

Set the output format.

The following format settings are possible depending on the [Format]

setting in the [System] screen.

Frequency

System Format

Format (HDMI)

59.94Hz

2160/59.94p

1080/59.94p

2160/29.97p

1080/29.97p

1080/59.94p

1080/59.94i

1080/29.97p

1080/29.97PsF

1080/29.97p

1080/23.98p(59.94i)

1080/23.98p(59.94p)

720/59.94p

50Hz

2160/50p

1080/50p

2160/25p

1080/25p

1080/50p

1080/50i

1080/25p

1080/25PsF

1080/25p

720/50p

24Hz

2160/24p

1080/24p

23.98Hz

2160/23.98p

1080/23.98p

1080/23.98PsF

1080/23.98p

Cannot be selected when [Crop Mode] is [Crop(1080)] or

[Crop(720)].

When [Crop Mode] is [Crop(720)], output is 720/59.94p.

It denotes “1080/23.98p over 59.94i”.

It denotes “1080/23.98p over 59.94p”.

When [Crop Mode] is [Crop(720)], output is 720/50p.

Factory settings:

2160/59.94p (AW-UE100WP/AW-UE100KP/

AW-UE100WPC/AW-UE100KPC)

2160/50p (AW-UE100WE/AW-UE100KE/

AW-UE100WED/AW-UE100KED)

Video Sampling [4:2:2/10bit, 4:2:0/8bit]

When [Format] in [HDMI] is [2160/59.94p] or [2160/50p], select the

video sampling output from the HDMI connector.

4:2:2/10bit

Output in 4:2:2/10bit mode.

4:2:0/8bit

Output in 4:2:0/8bit mode.

Factory settings:

4:2:2/10bit

<NOTE>

• When [Format] in [HDMI] is other than [2160/59.94p] or [2160/50p],

[Video Sampling] cannot be changed and is fixed at [4:2:2/10bit].

Bar [Camera, Colorbar]

Switch between camera images and color bars.

Camera

Camera images

Colorbar

Color bar

Factory settings:

Camera

Color Bar Type [Type1, Type2]

Select the type of color bar to display.

Type1:

Type2:

This is only enabled when [Bar] is set to [Colorbar].

Factory settings:

Type2

Tone [Off, Low, Normal]

Make the settings for the test tone signal (1 kHz) output while the

color bar is displayed.

Off

Test tone is not output.

Low

Test tone is output at low volume.

Normal

Test tone is output at normal volume.

This is only enabled when [Bar] is set to [Colorbar].

Factory settings:

Normal

OSD Mix/Crop Marker

Selects whether to turn Off/On display of camera menu, status and

crop frame.

12G SDI [Off, On

]

Selects whether to turn this Off/On for images output from 12G SDI

OUT connector.

3G SDI [Off, On

]

Selects whether to turn this Off/On for images output from 3G SDI

OUT connector.

HDMI [Off, On

]

Selects whether to turn this Off/On for images output from HDMI

connector.

NDI [Off, On

]

Selects whether to turn this Off/On for images of NDI output from the

LAN connector.

IP/

NDI|HX

[Off, On

]

Selects whether to turn this Off/On for images other than NDI images

(H.264/H.265/JPEG/RTMP/SRT/NDI|HX) output from the LAN

connector.

Off

The camera menus, statuses and crop frames are not

displayed on the output pictures covered by the setting

items listed above.

The camera menus, statuses and crop frames are displayed

on the output pictures covered by the setting items listed

above.

: Factory settings

<NOTE>

• When this is set to [Off], the camera menu can be displayed for

about 1 minute after the unit is turned on.

• It may not be possible to display the camera menus, statuses

and crop frames even when this is set to [On]. For details, refer to

“Exclusive conditions for [OSD Mix/Crop Marker]” (→ page 69).

106

107

Web screen configurations (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands