Panasonic AW-UE100 Operating Instructions Manual Download Page 71

Page: 71 / 180

Crop Marker [Off, YL, G, MG, YL+G, YL+MG, G+MG,

YL+G+MG]

Makes the settings for the crop frame displayed for images output to

12G SDI OUT, 3G SDI OUT, HDMI and LAN connectors.

Off

Crop frame is not displayed.

Only a yellow crop frame is displayed.

Only a green crop frame is displayed.

Only a magenta crop frame is displayed.

YL+G

Yellow and green crop frames are displayed.

YL+MG

Yellow and magenta crop frames are displayed.

G+MG

Green and magenta crop frames are displayed.

YL+G+MG

Yellow, green, and magenta crop frames are

displayed.

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

Return

Return to the previous menu level.

UHD Crop 2/2 screen

UHD Crop 2/2

Crop Out YL

Crop Adjust YL

Crop H Position 960

Crop V Position 540

Crop Zoom Ratio 200.00%

Return

Crop Out [YL, G, MG]

Makes the settings for the crop frame for images output to 3G SDI

OUT and LAN (NDI, and H.264/H.265/M-JPEG) connectors.

Output the yellow crop frame images.

Output the green crop frame images.

Output the magenta crop frame images.

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

<NOTE>

• The color frame specified in [Crop Out] will be a deeper shade when

compared to other colors used for frames.

Crop Adjust [YL, G, MG]

Make selections for the crop frame to adjust positioning.

Make position adjustments for the yellow crop frame.

Make position adjustments for the green crop frame.

Make position adjustments for the magenta crop

frame.

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

<NOTE>

• The color frame specified in [Crop Adjust] will be thicker when

compared to other color frames.

Crop H Position [0 to 3072]

Make settings for the position in the horizontal direction for the crop

frame specified in [Crop Adjust].

The variable range is 0 to 1920 when [UHD Crop] is [Crop(1080)]

and [Crop Zoom] is [Off], with 0 as the left edge and 1920 as the right

edge, and only even numbers can be set.

The variable range is 0 to 2560 when [UHD Crop] is [Crop(720)] and

[Crop Zoom] is [Off], with 0 as the left edge and 2560 as the right

edge, and only even numbers can be set.

The variable range when [Crop Zoom] is [On] is different depending

on the setting value of [Crop Zoom Ratio], with the variable range

being 0 to 3072 when the [Crop Zoom Ratio] is 500.00%, and only

even numbers can be set.

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

Crop V Position [0 to 1728]

Make settings for the position in the vertical direction for the crop

frame specified in [Crop Adjust].

The variable range is 0 to 1080 when [UHD Crop] is [Crop(1080)] and

[Crop Zoom] is [Off], with 0 as the upper edge and 1080 as the lower

edge.

The variable range is 0 to 1440 when [UHD Crop] is [Crop(720)] and

[Crop Zoom] is [Off], with 0 as the upper edge and 1440 as the lower

edge.

The variable range when [Crop Zoom] is [On] is different depending

on the setting value of [Crop Zoom Ratio], with the variable range

being 0 to 1728 when the [Crop Zoom Ratio] is 500.00%.

This is only enabled when [UHD Crop] is set to [Crop(1080)] or

[Crop(720)].

Camera menu items (continued)

Summary of Contents for AW-UE100





















































































































































































Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands

Panasonic AW-UE100, Operating Instructions Manual

Search results

Summary of Contents for AW-UE100

Reviews:

Related manuals for AW-UE100

Brands by name

Popular brands