Omron SmartSlice GRT1-Series Operation Manual Download Page 364

Page: 364 / 365

343

Revision History

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.

The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.

Revision code

Date

Revised content

November 2005

Original production

March 2006

Revised to include Analog I/O Units.

July 2006

Revised to include Counter Units and Positioning Units.

March 2007

Revised to include the following Units:
GRT1-OD4G-1, GRT1-ID8, GRT1-ID8-1, GRT1-OD8, GRT1-OD8-1,
GRT1-OD8G-1, GRT1-PD8(-1), and GRT1-PC8(-1).

July 2007

Revised to include the Temperature Input Units.

November 2007

Revised to include the following Units:
GRT1-IA4-1, GRT1-IA4-2, GRT1-TS2PK, GRT1-TS2T, GRT1-PD2G, and
GRT1-OD4G-3.

Cat. No. W455-E1-06

Revision code

Summary of Contents for SmartSlice GRT1-Series














































































































































































































































































































































































Search results

Summary of Contents for SmartSlice GRT1-Series

Reviews:

Brands by name

Popular brands

Omron SmartSlice GRT1-Series, Operation Manual

Search results

Summary of Contents for SmartSlice GRT1-Series

Reviews:

Brands by name

Popular brands