292
Other Errors
Section 9-4
After replacing an Analog
Input Unit or Temperature
Input Units, the TS indicator
on the Communications Unit
flashes red and the TS indica-
tor on the replaced Unit lights
red. The TS indicator on the
Slice I/O Unit to the left of the
replaced Unit is light green
and TS indicator on the Unit
on the right is not lit.
The indicator status shown below will occur when the registration table has been created
or data has been backed up and then an I/O Unit other than an Analog Input Unit or Tem-
perature Input Unit is replaced with an Analog Input Unit or Temperature Input Unit. It will
also occur when an Analog Input Unit or Temperature Input Unit is replaced with a differ-
ent model of Analog Input Unit or Temperature Input Unit.
Check the model of the I/O Unit. When replacing a Unit, always replace it with the same
model. After replacing the Unit, turn the power supply OFF and ON.
After replacing an I/O Unit, the
TS indicator on the Communi-
cations Unit lights red and the
TS indicator on the replaced
Unit lights red. The TS indica-
tor on other I/O Unit flash red.
The indicator status shown below will occur when the registration table has been created
or data has been backed up and then an I/O Unit is replaced with a different model of I/O
Unit (but not an Analog Input Unit or Temperature Input Unit).
Check the model of the I/O Unit. When replacing a Unit, always replace it with the same
model. After replacing the Unit, turn the power supply OFF and ON.
Status
Likely cause and remedy
LED Indicators
Communications Unit
I/O Units
End Unit
On left of
replaced Unit
On right of
replaced Unit
Replaced Analog Input or
Temperature Input Unit
LED Indicators
Communications Unit
I/O Units
End Unit
Replaced Unit (not an Analog
Input or Temperature Input Unit)
Summary of Contents for SmartSlice GRT1-Series
