Omron JX-A4004, User Manual, Page: 81 / 220

4-3
4-1 Monitor Mode
4
Functions
Multi-function Input Monitor [d005]
Displays the input status of the multi-function input terminals.
C011 to C015 (contact selection) are excluded so only physical status will be displayed disregarding
of the normally open or normally close selectiong.
Multi-function Output Monitor [d006]
Displays the output status of the multi-function output terminals and relay output terminals.
C031 and C036 (contact selection) are excluded so this monitor indicates the signal status of the
functions (C021 and C026) allocated to each multi-function output terminal disregarding the normal-
ly open or close selection.
Output Frequency Monitor (After Conversion) [d007]
Displays a conversion value obtained by multiplying the Inverter output frequency by the coefficient
set in [b086].
Displayed value = "Output frequency [d001]" × "Frequency conversion coefficient [b086]"
(Display) [d007]
0.00 to 99.99
: Displays in increments of 0.01.
100.0 to 999.9 : Displays in increments of 0.1.
1000. to 9999. : Displays in increments of 1.
1000 to 3996
: Displays in increments of 10.
(Setting range) [b086] 0.1 to 99.9: Can be set in increments of 0.1.
(Example)
When the output frequency [d001] = 50.0 Hz, and
the frequency conversion coefficient [b086] = 1.1,
the monitor [d007] displays "55.0" through 50.0 × 1.1 = 55.0.
Multi-function input monitor
1 2 3 4 5
ON
OFF
(OFF) (ON) (OFF) (ON) (OFF)
Display
:
ON
:
OFF
(Example) Multi-function input terminals 4, 2 : ON
Multi-function input terminals 5, 3, 1 : OFF
Multi-function output monitor
11
AL2
ON
OFF
(OFF) (ON)
Display
:
ON
:
OFF
(Example) Multi-function output terminal 11 : ON
Relay output terminal AL2 : OFF