Omron JX-A4004, User Manual, Page: 66 / 220

3-16
3-5 Parameter Transition
3
Operation
3-5 Parameter Transition
*1. Data is not stored by pressing the Mode key.
*2. Press the Enter key to store the data.
*3. When you press the Mode key after you return to the parameter number display without storing data in the
extended function mode, the mode selection function is selected.
*4. When you press the Enter key with d*** or F001 displayed, the monitor value is stored as the initial display
that appears when the power is turned on.
*5. When you press the Enter key, the first digit of each parameter setting is stored as the initial display that
appears when the power is turned on.
(Example: , etc.)
* To display a specific monitor when the power is turned on, press the Enter key with that monitor displayed. If a
parameter for an extended function code is stored after pressing the Enter key, however, that code (A---, b---,
C---, d---, or H---) appears at the next power-on. To prevent this, always press the Enter key again with the
desired monitor displayed after storing a parameter.
*4
*3
*1
*1
*2
*2
d001 0.0
d083
a---
b---
c---
h---
a001 0000
f001
a001
a002
f004
*4
Press the key
*4
*4
*5
*5
*5
*5
0001 9999
0000
0001 9999
a003
f002 a---
,