Dangers
DANGER
General
An i4H robot can cause serious injury or death, or damage to itself and other equipment,
if the following safety precautions are not observed:
•
All personnel who install, operate, teach, program, or maintain the system must read
this guide, read the
Robot Safety Guide (Cat. No. I590)
, and complete a training
course for their responsibilities in regard to the robot.
•
All personnel who design the robot system must read this guide, read the
Robot
Safety Guide (Cat. No. I590)
, and must comply with all local and national safety regu-
lations for the location in which the robot is installed.
•
The robot system must not be used for purposes other than described in
on page 1-2. Contact your local Omron support if you are not sure of the suitabili-
ty for your application.
•
The user is responsible for providing safety barriers around the robot to prevent any-
one from accidentally coming into contact with the robot when it is in motion.
•
Power to the robot and its power supply must be locked out and tagged out before any
maintenance is performed.
•
When the robot or robotic equipment is not investigated in conjunction with a system
work cell, the instructions shall call attention to the following: the interlocked portion of
barrier shall be installed, applied, and maintained so that it has the capability of being
easily unlocked from the inside of the safeguarded space, with or without power avail-
able, when the possibility of full body access exists.
i4H robots are not collaborative robots. They require a dedicated work area that will pre-
vent personnel from coming into contact with them during operation.
The normal and intended use of these robots does not create hazards.
These robots have been designed and constructed in accordance with the relevant re-
quirements of IEC 60204-1.
These robots are intended for use in parts assembly and material handling for payloads
up to 15.0 kg.
Refer to the
Robot Safety Guide (Cat. No. I590)
for details on the intended use of our
robots.
These robots are intended for industrial use only.
Perform a risk assessment before using.
These robots are not intended for:
•
Use in the presence of ionizing or non-ionizing radiation.
•
Use in potentially explosive atmospheres.
•
Use in medical or life saving applications.
•
Use in a residential setting.
Installation
The robot system must be installed with user-supplied interlock barriers. The interlocked
barriers must open the E-Stop circuit in the event of personnel attempting to enter the
work cell when High Power is enabled. Failure to install suitable guarding or interlocks
could result in injury or death. We strictly prohibit installation, commissioning, or opera-
tion of any robot without adequate safeguards. These must be compliant with applicable
local and national standards.
Safety Precautions
13
i4H Robots User's Manual (I660)
Summary of Contents for i4-650H
