![background image](http://html1.mh-extra.com/html/omron/grt1-crt-05-2008/grt1-crt-05-2008_operation-manual_742290010.webp)
Safety Precautions
xi
Apply safety measures in external circuits (that is, not in the Smart-
Slice I/O Terminal) to keep safety in the system. These measures
must keep safety if a malfunction in the control system or other ex-
ternal factor which has an effect on the control system causes a
problem. Include the items below. Not doing this can cause serious
accidents.
• There must be emergency stop circuits, interlock circuits, limit cir-
cuits, and other safety measures in external control circuits.
• The SmartSlice outputs can stay ON or OFF because of welding
or burning of the output relays, or destruction of the output tran-
sistors. As a countermeasure for such errors, there must be ex-
ternal safety measures to keep safety in the system.
• The SmartSlice I/O Terminal will continue operating when one or
more I/O Units are missing from the SmartSlice I/O Terminal. The
other I/O Units will continue the control operations, including the
control of the outputs. As a countermeasure for such errors, there
must be external safety measures to keep safety in the system.
The CPU Unit refreshes I/O when the program is stopped in PRO-
GRAM mode. Fully make sure that it is safe before changing the
status of bits or words in memory allocated to Output Slaves, Spe-
cial I/O Units, or CPU Bus Units. If you change the bits or words al-
located to a Slave or Unit, you could cause incorrect operation of
the loads connected to the Slave or Unit. The operations below will
change memory status.
• Transferring I/O memory data to the CPU Unit from a Program-
ming Device
• Changing present values in memory from a Programming Device
• Force-setting or force-resetting bits from a Programming Device
• Transferring I/O memory files from a Memory Card or EM file
memory to the CPU Unit
• Transferring I/O memory from a host computer or from a PLC on
a network
Summary of Contents for GRT1-CRT - 05-2008
