![background image](http://html1.mh-extra.com/html/omron/f10-c20/f10-c20_instruction-sheet_741247008.webp)
10
9
A.T.ON
A.T.OFF NM
TMR
LINE
≠
WD
=
All the DIP switch pins are set to OFF
at the factory.
OFF Delay Timer
No Marking:Timer OFF.
Matching/Not Matching
≠:
Output ON when object does
not match registered model.
=:
Output ON when object
match registered model.
External Input
(F10-C50/C55 only)
LINE:
Executes external input in
RUN mode via input line.
RS-232C/422:
Executes external
input in RUN mode via serial
communications.
TMR:Delays the output operation
when the control output goes from
ON to OFF(Default value is 40ms.
Refer to the Operation Manual for
the Unit for changing procedure).
RS-232C
/422
A.T.ON
A.T.OFF NM
TMR
LINE
≠
WD
=
All the DIP switch pins are set to OFF
at the factory.
・Model Size
WD:Wide mode
NM:Normal mode
Normal mode
Wide mode
Detection Range:
Shows the range of
the detection area.
Teaching Area:
Registers this range
as the model.
Model 1
detection
range
Model 3
detection
range
Model 2
detection
range
Teaching area:
Divedes the
pattern into three,
and registers it as
three models.
Use wide mode if the pattern in one direction is comparatively long, e.g., a production date.
The measuring time for wide mode, however, takes three times longer than Normal Mode, as the
pattern is processed as three models instead of one.
RS-232C
/422
形F10-C20/C25/C30/C35/C50/C55 02.11.19 10:12 AM ページ 9