Omron F10-C20 Instruction Sheet Download

Page: 2 / 35

・ In the place where the operating ambient humidity is not between

-35 and 85 % RH.

・ In the place where corrosive gas, combustible gas, dust, salinity or

iron powder exist.

・ In the place where vibration or shock is directly transmitted to the

product.

・ In the place exposed to the direct sunlight.
・ In the place where the spray of water, oil or chemicals exists.

(2) Mounting on a Flat Surface Directly

When mounting the Amplifier directly, install with the M4 screw
using the flat washer together.
Make sure that the tightening torque of each screw on the Amplifier
is no greater than 1.2 N・m.

(3) Mounting to DIN Track

①To mount the Amplifier on the DIN Track,

first enlarge part A, and then push the
Amplifier in direction B.

②To remove the Amplifier from the DIN

Track, pull the mounting hook of the
Amplifier toward you.

(4)Mounting Space

The Amplifier radiates heat. If more than one Unit is installed side-
by-side, make sure that there is a minimum space of 5 mm between
adjacent Units.

2. Operating Temperature

The operating ambient temperature range of the Amplifier is
between 0 ℃ and 50 ℃.
Be sure to keep under the following conditions.
・ Provide enough ventilation to the Amplifier in order to keep the

ventilation well .

・ Do not install the Amplifier close to heat-radiating devices such

as heaters, transformers, and high-capacity resistors.

・ Keep the operating ambient temperature under 50 ℃.
・ If the operating ambient temperature is close to 50℃, use the

When the product is used under the circumstances below, ensure
adherence to the limitations of the ratings and functions. Also, take
countermeasures for safety precautions such as fail-safe installations.
①Use under the circumstances or environment which are not described

in the instruction sheet.

②Use for the equipment which require higher level of safety, such as

nuclear devices, railroad, aircrafts, vehicles, combustion devices,
amusement machinery, medical equipment, safety devices.

③Use for the applications where death , serious injury or property

damage is possible and extensive safety precautions are required.

function.

Be sure to follow the safety precautions below for added safety.
(1) Do not use the sensor under the environment with explosive or

ignition gas.

(2) Set the Sensor away from the high voltage machines or the high-

tension lines to secure the safety of the operation and the
maintenance.

(3) keep the supply voltage within the specified range in this instruction

sheet.

(4) If the Sensor or cable has lock mechanisms, be sure to lock the

mechanisms securely before use.

(5) Never disassemble, repair nor tamper with the product.
(6) Dispose of the product as industrial waste.
(7) Do not short-circuit the load. Doing so may cause Sensor damage or

malfunction.

Be sure to keep the followings to make full use of the Sensor function.
1. Conditions
(1) Do not use the Amplifier under the following conditions.

・ In the place where the operating ambient temperature is not

between 0 ℃ and 50 ℃.

・ In the place where condensation may occur, because the ambient

temperature changes are extreme.

Correct Use

Safety Precautions

PRECAUTIONS IN USING THE PRODUCT

Amplifier

Mounting hook

DIN Track