24
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
Closer to
model
in appearance
Not closer to
model
in appearance
The closer to the model in ap-
pearance, the higher the level.
If no sensing object is within the
sensing area or if the sensing ob-
ject is greatly different from the
model. the level will be lower.
5.2 MONITOR Mode
●
Status indicators（F10-C20/C25）
●
Status indicators（F10-C30/C35/C50/C55）
PATT
BANK/STATUS
PLN
DEV
AVE
Pattern
measuremet
Pattern
masurement
Bank No.
Degree of
coformance
with model
BANK/STATUS
Press the Switch
Display Item button
(Return to bank number
display no operation is
performed for 5 seconds)
Set the mode selector to MON.
Measurement continues as long as the
selector is set to MON.
1
The Sensor operates in MONITOR mode for threshold level
adjustments and desktop sample tests for object discrimination
with no signal output. No external output operation signal or
external input signal is accepted in MONITOR mode.
On the basis of the registered model, the level indicator
indicates the degree of conformity of the sensing object.
Pattern Measurement
23
Change of Plain Measurement Detection Range Selection Mode
*Detection range at Plain Measurement
Detection range at Plain Measurement is as following.
Mode 1 and 2 can be changed by the operation at the power supply input.
Plain Measurement detection range selection mode
Mode 1(Initial setting)
Mode 2
Plain
Measurement
with A.T.OFF
Detection range at measurement
becomes the same size as the
teaching area.
Detection can be enlarged.
It becomes the following dotted
line frame.
Plain
Measurement
with A.T.ON
Detection range at measurement
becomes the following dotted line
frame.
Detection can be enlarged.
It becomes the following dotted line
frame.
A
Detection range
(=Teaching area)
Detection Range
B
Approx.1.0mm (F10- S30R)
Approx.0.5mm (F10- S15R)
Approx.0.2mm (F10- S05R)
Detection range
Approx.4.0mm (F10- S30R)
Approx.2.0mm (F10- S15R)
Approx.0.7mm (F10- S05R)
Detection range
Approx.1.0mm (F10- S30R)
Approx.0.5mm (F10- S15R)
Approx.0.2mm (F10- S05R)
Detection range becomes small when a pattern is in the end as the
following figure.
When using F10 -C30/C35/C50/C55
When switching banks setting around of a bank to switch for Plain Measurement
detection range selection mode different from the bank causes
Plain Measurement
detection range type error.
Please note that you set the same mode as a bank to
switch to around of the bank.
Detection range
(=Teaching area)
Approx.1.6mm (F10- S50R)
Approx.1.6mm (F10- S50R)
Approx.6.4mm (F10- S50R)
形F10-C20/C25/C30/C35/C50/C55 02.11.19 10:12 AM ページ 23
