![background image](http://html1.mh-extra.com/html/omron/f10-c20/f10-c20_instruction-sheet_741247007.webp)
8
7
Registers the pattern
within the frame as
the model.
A.T.ON
A.T.OFF NM
TMR
LINE
≠
RS-232C
/422
WD
=
Automatic Teaching
A.T.ON :Teaching area automatically selected
A.T.OFF:Teaching area fixed
All the DIP switch pins are set to OFF
at the factory.
A.T.ON
A.T.OFF
Registers only the pattern within the
teaching area as the model.
Registers the pattern
with the greatest contrast
with the background.
Too pale
Most
suitable
Slightly
pale
A
B
D
C
E
DIP Switch
9
Automatically selects the pattern
most suitable for the model. The part
within the detection range where the
target is taken as the most suitable
pattern for the model.
*If the pattern is at the very edge of,
or slightly outside, the detection
range, it may not be correctly taught.
Make sure the pattern is as close as
possible to the center of the detection
range.
OK
Teaching status
(Plain)
Plain
NG
Color
NG
Stain
NG
Pattern
OK
NG
Sensing object
Registered pattern
pattern measurement
Plain Measurement
Measures the degree with which the pattern and the detected
image match to differentiate OK and NG images.
Determines the contrast and average density to differentiate
OK and NG images.
●
Changing Measurement Items
Automat cally switches between
pattern measurement and plain
measurement depending on the
taught model.
Executes pattern
measurement only.
Enters the mode for selecting and
setting the bank in TEACH Mode
8
PATT・PLN
PATT
PATT/BANK
PATT
PATT/BANK
●
Bank Selection Mode
(F10-C30/C35/C50/C55)
PATT・PLN
PATT/BANK
PATT・PLN
形F10-C20/C25/C30/C35/C50/C55 02.11.19 10:12 AM ページ 7