![background image](http://html1.mh-extra.com/html/omron/f10-c20/f10-c20_instruction-sheet_741247011.webp)
16
4.
Connection of Serial Communication
15
●1:1 Connection
F10-VR2 RS-232C Cable
F10-C50/C55
IBM PC/AT or
compatible
You can input the measurement trigger and output the measurement
results via an RS-232C port. You can also back up the settings in an
IBM PC/AT or compatible. Refer to the Operation Manual for the Unit
for details on communications commands.
System cnfiguration
●I/O Signals
●Switching Banks (F10-C30/C35/C50/C55)
Signal
OUTPUT
ENAB
S̲TEACH
M̲TEACH
TRIG
CONT
BANK1
BANK2
BANK3
Control output
Enabled output
Stationary object teaching input
Moving object teaching input
Measurement trigger input
Continuous measurement input
Bank switching input (F10-C30/C35/C50/C55)
Function
・All input signals are enabled in RUN mode only.
Bank 0
Bank 1
Bank 2
Bank 3
Bank 4
Bank 5
Bank 6
Bank 7
BANK1
BANK2
BANK3
Bank No
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
You can switch banks by connecting BANK1 to BANK3
as shown below.
形F10-C20/C25/C30/C35/C50/C55 02.11.19 10:12 AM ページ 15