manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 72

2–48

XR-56-201 5

Viewer 03/18

Viewer

User Defined ANC Packets

To cater for additional ANC Packet types, the system allows you to specify up to three user-defined 

ANC Packet types for the system to watch for alongside its standard selection.

ANC Packets are defined by DID (Data Identifier) and its SDID (Secondary Data Identifier) values. 

However, these values are not visible for the user to check whether a particular packet is already on 

the list but under an unfamiliar name.

To avoid potential duplication of ANC packets we recommend that define and check user-defined 

packet types is as follows:

Reset the 

ANC Watch

 / 

ANC Counts

 displays.

Use the 

ANC Watch

 / 

ANC Counts

 displays to monitor a sample piece of video that includes the 

ANC packets that you are interested in.

At the end of the process, check to see how many ‘Unknown’ ANC packets have been counted. 

If none have been counted, all the ANC packets in your sample are already defined. A quick scan 

of the 

ANC Counts

 pages will reveal which ANC packets were found.

See the "ANC User Section" section of the Configuration chapter for details of how to setup 

user-defined ANC packets.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands