manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 127

Ultra XR User Guide

5–7

XR-56-201 5

Connections

Analyser Inputs

Analyser Block

The

 Analyser 

block represents the 

unit's virtual analyser connection. 

This block converts the selected input SDI or HDMI input connection video into a format that can be 

analysed / displayed on the user interface.

Linking the 

Analyser

 block output 

to the input of the 

Local User 

Interface

 block will convert the 

user interface format and frame 

rate to the currently connected 

output block.

HDMI Input Block

The HDMI Input block can be connected to the A

nalyser/Convertor

 block to allow basic analysis of the 

HDMI signal.

Link the 

HDMI Input

 block to the 

Analyser 

block and the format will 

be converted to that of the output 

block connected to the 

Local User 

Interface

 block.

The 

HDMI Input

 

represents 

the HDMI 1.4 physical input 

Connection.

If there is no signal present the block will display "No Input" otherwise it will display the currently 

detected format and frame rate.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands