manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 70

2–46

XR-56-201 5

Viewer 03/18

Viewer

ANC Watch Controls

When the 

Anc Watch

 tile is selected, the following buttons are available:

Reset

  this button allows any accumulated errors to be cleared.

ANC Watch

  this jumps to the ANC Watch display.

Set 1

 

this jumps to the first set of detail ancillary information.

Set 2

 

this jumps to the second set of detail ancillary information.

Set 2

 

this jumps to the seventh set of detail ancillary information.

User Defined

  this jumps to the user-defined ancillary information.

Common ANC Packets

The following common ANC packets are detected by the system:

Payload ID S352 

SMPTE 291M defined Payload Identification data packet in VANC space.

HD Audio S299 

SMPTE 291M defined HD audio data in HANC space.

HD Ctrl S299 

SMPTE 291M defined HD control data in HANC space.

EDH RP165 

SMPTE RP165-EDH packet containing EDH (error data handling) and CRC 

(cyclic redundancy counts) which only appears on SD-SDI signals.

SD Aux S272 

SMPTE 272M defined SD auxiliary data in HANC space.

SD Audio S272 

SMPTE 272M defined SD audio data in HANC space.

SD Ctrl S272 

SMPTE 272M defined SD control data in HANC space.

Audio S2020 

SMPTE S2020 defined standardized data packet defining the encoding for 

a Dolby stereo or a multi-channel surround group of audio channels.

WSS RDD8 

SMPTE defined wide screen switching packet in VANC space.

OP47 Dist. 

Free TV Operational Practice OP-47 defined distribution of Closed 

Caption/Subtitling data in VANC space.

OP47 Transpt. 

Free TV Operational Practice OP-47 defined transport of Closed Caption/

Subtitling data in VANC space.

Caption 708 

EIA 708 standard defining closed caption data for HD-SDI in VANC space.

Caption 608 

EIA 608 standard defined closed caption data for SD SDI 525i (NTSC) in 

VANC space.

ARIB-B 22 

ARIB defined Sub information data packet in VANC.

ARIB-B 23-1 

ARIB defined user data 1 packet in the VANC space.

ARIB-B 23-2 

ARIB defined user data 2 packet in the VANC space.

ARIB-B 35 

ARIB defined trigger signal data packet for data broadcasting.

ARIB-B 37 Mob. 

ARIB defined closed captioning information data packet.

ARIB-B 37 Ana 

refers to the analogue video data packet om VANC space.

ARIB-B 37 SD 

ARIB defined SD data packet in VANC space.

ARIB-B 37 HD 

ARIB defined HD data packet in VANC space.

ARIB-B 39 

ARIB defined inter-stationary control packet in VANC space.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands