manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 140

5–20

XR-56-201 5

Connections 03/18

Connections

SDI Pass Through Mode

The signal on the 

SDI Inputs

 block can be routed to the 

SDI Outputs 

block with exactly the same video 

format, frame rate and physical link configuration.

Although there is a permanent link from the 

SDI Inputs 

block to the 

Pass Through

 block, for SDI 

Pass Through mode to operate, the link from the 

SDI Inputs

 block must be made to the 

Analyser / 

Converter

 block

In the example above a Dual Link signal connected to SDI 1 and SDI 2 inputs is looped through to the 

SDI 3 and SDI 4 outputs.

While the system is in Pass Through mode, the SDI Outputs format is defined by the input signal format 

and the 

SDI Outputs 

block controls are disabled. Genlock is also disabled when the system is in Pass 

Through mode.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands