manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 168

B–18

XR-56-201 5

Installation 03/18

Installation

Hardware Maintenance

Connectors

Ensure that the correct type of connector is used in all circumstances. All of the BNC connectors on the 

unit are 75 Ohm.

Connecting 50 Ohm cables into the unit's 75 Ohm connectors will cause damage that is not 

covered under warranty.

All connectors such as BNCs, HDMI and DisplayPort only have a finite number of insertions before they 

wear out and become unreliable.

When using the Ultra in a production environment, it is recommend practice to use sacrificial cables / 

connectors to reduce the wear on the Ultra's HDMI connections. For example a short HDMI extender 

cable permanently connected to the Ultra instead of inserting different cables directly into the Ultra.

Excessively worn or damaged connectors are not covered by the unit's warranty.

Fans

The smooth running of the unit's fans is essential to ensure the correct operation of the unit.

Fan failure or restricted airflow may cause permanent damage to the unit

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands