manualshive.com logo in svg

OmniTek Ultra XR, User Manual

Share
Download
OmniTek Ultra XR User Manual Download Page 117

Ultra XR User Guide

4–25

XR-56-201 5

Con
figur
ation

Licences

Overview

The functionality of the Ultra system is determined by the options that have been installed as shown in 

the 

Configuration

  - 

Licences

 menu.

This page lists the individual facilities that are licensed on your Ultra system and indicates the start 

date of the licence (where installed) and either the number of days left (for time-limited licences) or 

the word Permanent.

Facilities listed as Not installed have either never been installed or were the subject of a time-limited 

licence that has expired. To add this facility just requires you to purchase the relevant licence and add 

this licence to your system.

See the "Licence Management" section in the Installation chapter for detail about how to 

update the unit's licence.

Where a facility is listed as No Hardware, however, extra hardware is needed in order to support this 

option. Where this is the case, you may need to return the Ultra either to Omnitek or to your Omnitek 

dealer: your dealer will be able to advise you on this.

Summary of Contents for Ultra XR

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands