OmniTek Ultra XR User Manual Download Page 114

Page: 114 / 184

4–22

XR-56-201 5

Configuration 03/18

Configuration

User Interface Section

The User Interface section in

the Configuration - System menu

allows the menu colour scheme to

be selected

Hue

this drop down menu allows the user interface colour scheme to be

selected.

Brightness

this drop down menu allows the brightness of user interface colour be

selected from a choice of

Default

High

Low

Graticule colour

allows the viewer graticule colour to be selected.

Waveform marker colour

allows the Waveform tile marker colour to be selected.

Cage colour

allows the Picture tile cage colour to be selected.

Hide tile titlebar when maximised

when enabled (1) will display the user interface in 'clean'

mode, free from unwanted menus and text.

Files Section

The "Files" section allow the system MIB file to be down loaded,

the system operating software to be updated and the system to be

returned to factory setup.

SNMP MIB

this button, when selected, will down load the system’s MIB file for use with

SNMP applications.

Update S/W

this button allow new operating software to be installed, either from a USB

plugged into the Ultra unit (when operating the Ultra via HDMI monitor) or from

a folder (when operating the Ultra via a web browser).

Factory Reset

this button returns all of the systems settings in all of the menus back to factory

default values.

Please contact [email protected] before using this.

See the "Software Maintenance" section in the Installation appendix for details about how to

install new software.

Summary of Contents for Ultra XR

























































































































































































Search results

Summary of Contents for Ultra XR

Reviews:

Brands by name

Popular brands

OmniTek Ultra XR, User Manual

Search results

Summary of Contents for Ultra XR

Reviews:

Brands by name

Popular brands